Copper Modular Network TAP | Garland Technology

Visibility starts with the packet. A network TAP (test access point) is a hardware device that allows you to access and monitor your network traffic by copying packets without impacting or compromising network integrity.

Garland's Copper Modular Network TAPs provide full duplex packet visibility guaranteeing your tools see every bit, byte, and packet.^®

These modular chassis are ideal for 10/100M or 10/100/1000M copper data center deployments and can house up to 12 TAPs in a 2U space, allowing you to fully deploy and manage your monitoring and security tools.

Specifications
Resources
Network Diagrams

Chassis Options
Model No.	Chassis/TAPs*	Power Supplies	Voltage	Current (nominal)	Consumption (maximum)	Dimensions (WxHxD)
M1G1ACE	1U; up to 4 TAPs	Dual Internal AC	100-240VAC	0.75A@115VAC	86.25 Watts	17.40” x 1.75” x 13.45” (441.96mm x 44.45mm x 341.63mm)
M1G1DCE	100/1000M	Dual Internal DC	36-60VDC	1A@48VDC	48 Watts	17.40” x 1.75” x 13.45” (441.96mm x 44.45mm x 341.63mm)
M1G2ACE	100/1000M	Dual Internal AC	100-240VAC	1A@115VAC	115 Watts	17.40” x 3.47” x 13.45” (441.96mm x 88.14mm x 341.63mm)
M1G2DCE	100/1000M	Dual Internal DC	36-60VDC	2.8A@48VDC	134.4 Watts	17.40” x 3.47” x 13.45” (441.96mm x 88.14mm x 341.63mm)
M1GC*	Management card: Ethernet/GUI - and- Serial/CLI for M1GxxE
*Blanking plates are used if a management card is not required or if not all TAP modules are populated. Management cards and additional GT TAP modules can be added to the chassis.

Copper Breakout TAP Module Options
Model No.	Network Speed	Network	Monitor	Breakout	Aggregation	Regeneration /SPAN	Failsafe	Data Diode	Power
M100CCB*	10/100M	2 Copper-RJ45 Passive	2 Copper-RJ45	Yes	No	No	Passive	Yes	POE
M1GCCB	10/100/1000M	2 Copper-RJ45	2 Copper-RJ45	Yes	No	No	Yes	Yes	Dual AC/DC
*Supports Power over Ethernet

Model No.	Network Speed	Network	Monitor	Breakout	Aggregation	Regeneration /SPAN	Bypass	Flow
CTAP-M1GCCREG	10/100/1000M	2 Copper-RJ45	2 Copper-RJ45	No	No	Yes	No	Dual