Network Aggregating TAPs

Aggregation/regeneration network TAPs are used to capture 100% full duplex network traffic; the traffic can then be sent to multiple monitoring appliances to analyze your network. Aggregation TAPs support breakout and regeneration/SPAN modes and let you see every bit, byte and packet®.

  • 100% network visibility
  • 100% secure and invisible; no IP address; no Mac address; cannot be hacked
  • Media Conversion for:
    -Fiber 1G (SX, LX to copper/SFP)
    -Fiber 10G (SR, LR, ER)
  • Copper TAPs in 10M/100M or 1G
  • New Universal Aggregating TAP
    -Supports breakout, regeneration/SPAN, or bypass mode
  • Portable, plug & play units, 1U or 2U chassis systems, or 1U modular system
  • Read the 101 blog on aggregating TAPs
  • Made, tested & certified in the USA
Aggregation TAP Flow


P100-Quarter-2017-LR.png

100M Passive Aggregating TAPs

  • Two (2) 1G Aggregated Monitoring ports
  • Aggregation-mode only TAP
  • Supports Power over Ethernet (PoE)
  • Plug & Play; easy configuration; switches on back

See Complete Specifications


PC104-Quarter-2017-LR.png

100M Passive Aggregating TAPs

  • Two (2) 1G Aggregated Monitoring ports
  • Aggregation-mode only TAP
  • Supports Power over Ethernet (PoE)
  • Stack design with board-to-board connectors
  • Media: Dual-row, 8 circuits, copper alloy base, gold flashed

See Complete Specifications


P1GCCx_Quarter-2017-LR.png

10/100/1000M (1G) Copper Portable Aggregating TAPs

  • Supports Link Speed Synchronization
  • Supports: breakout, aggregation, regeneration/SPAN modes
  • Plug & Play; easy configuration; switches on back
  • Use alone, or fit 4 portables into a rack mount kit

See Complete Specifications


P1GCCx_Quarter-2017-LR.png

100M/1G Copper Portable Aggregating Universal TAPs

  • Universal TAPs support: breakout, aggregation, regeneration/SPAN or bypass mode
  • Plug & Play; easy configuration; switches on back
  • Use alone, or fit 4 portables into a rack mount kit
  • Supports link failure propagation (LFP)
  • Supports jumbo frames and passes physical errors
  • Supports packet injection in aggregation mode

See Complete Specifications


P1GMCx_Quarter-2017-LR.png

1G Fiber Portable Aggregating TAPs

  • Media conversion: SX or LX to copper or SFP
  • Supports breakout, aggregation, regeneration/SPAN modes
  • Plug & Play; easy configuration; switches on back of TAP
  • Use alone, or fit 4 portables into a rack mount kit
  • Supports jumbo frames and passes physical errors

See Complete Specifications


M1G1ACE 1A-1U Chassis-2017-LR.png

1U or 2U 1G Modular Chassis System for Copper and Fiber Aggregating TAPs

  • Exclusive high density 1U = 4 TAPS | 2U = 12 TAPS
  • Remote management option with CLI or GUI
  • Hot swappable
  • Supports packet slicing and jumbo frames
  • Link failure propogation (LFP)
  • Aggregation TAPs are configurable to breakout and regeneraton/SPAN modes

See Complete Specifications


INT1G10CSA_Quarter-2017-LR.png

1G Copper High Density Aggregator

  • 1U High Density Solution:
    -TAP up to 4 network segments
    -Aggregate traffic to 1 or 2 monitoring ports
    -Can fit to 2 INT1G10CSA units in 1U space
  • Supports: breakout, aggregation, regeneration/SPAN modes
  • Link speed synchronization
  • Link failure propagation (LFP)
  • Supports jumbo frames and passes physical errors

See Complete Specifications


M10G1xxx_M10GSSBP_Quarter-2017-LR.png


10G Fiber Modular Aggregating Universal TAPs

  • Universal TAPs support: breakout, aggregation, regeneration/SPAN or bypass mode
  • 10G Media Conversion: to SR, LR and ER
  • Monitor four inline appliances with fail over assurance
  • 1U chassis system supports up to 4 TAPs
  • Configure and manage remotely or locally
  • Hot swappable TAP modules
  • Supports jumbo frames, packet injection, link failure propagation (LFP)

See Complete Specifications