UniversalTAP: 1G Modular Aggregator
Visibility starts with the packet. A network TAP (test access point) is a hardware device that allows you to access and monitor your network traffic by copying packets without impacting or compromising network integrity.
The UniversalTAP: 1G Modular Aggregator are purpose-built network TAPs that support aggregation, TAP ‘breakout,’ bypass and regeneration/SPAN modes guaranteeing your tools see every bit, byte, and packet.®
AggregatorTAPs are used to capture 100% full duplex traffic that can then be sent to multiple monitoring appliances or down to one monitoring port to analyze your network.
- Scalable Modular TAPs System:
- 2U holds up to 12 TAPs - backplane filtering within TAP row.
- 1U holds up to 4 TAPs - backplane filtering between TAPs and port.
- Management and Non-Management Options:
- Simple easy to use GUI management
- Non-management chassis available; (management card can be added at later date).
- Dual internal AC or DC power supplies.
- 100% secure and invisible; no IP address, no Mac address; cannot be hacked
- Made, tested and supported in USA
|Model No.||Chassis/TAPs*||Power Supplies||Dimensions (WxHxD)|
|M1G1ACE||1U; up to 4 TAPs||Dual Internal AC||17.40” x 1.75” x 13.45”
(441.96mm x 44.45mm x 341.63mm)
|M1G1DCE||1U; up to 4 TAPs||Dual Internal DC|
|M1G2ACE||2U; up to 12 TAPs||Dual Internal AC||17.40” x 3.47” x 13.45”
(441.96mm x 88.14mm x 341.63mm)
|M1G2DCE||2U; up to 12 TAPs||Dual Internal DC|
|M1GC*||Management card: Ethernet/GUI - and- Serial/CLI for M1GxxE|
|*Blanking plates are used if managment card is not required or if not all TAP modules are populated. Management card and additional GT TAP modules can be added to chassis.
*The 1G - 1U/2U Modular Chassis System with optional CLI or GUI remote management replaces the 1G - 1U/2U Modular Chassis System with Serial or Non-serial port management [Including M1G1AC, M1G1ACS, M1G2AC, M1G2ACS, M1G1DC, M1G1DCS, M1G2DC, M1G2DCS]. Read the EOL document.
|Aggregation TAP Options||Data Diode
|Model No.||Network Speed||Media||Modes|
|M1GCCBP||10/100/1000M||2 Copper-RJ45||2 Copper-RJ45||Yes||Yes||Yes||No||Yes||No|
|M1GCSBP||10/100/1000M||2 Copper-RJ45||2 SFP||Yes||Yes||Yes||No||Yes||No|
|M1GMCA||1G||2 SX Multi-mode,
|M1GMSA||1G||2 SX Multi-mode,
|M1GSCA||1G||2 LX Single-mode,
|M1GSSA||1G||2 LX Single-mode, passive LC-Fiber||2 SFP||Yes||Yes||Yes||No||No||Yes|