Copper Aggregator Universal Network TAPs

100M/1G | Portable
  • Rack Mount Copper Products

Request a Quote

Supports Tap 'Breakout,' Aggregation, Regeneration/SPAN and Bypass modes

Network test access points (TAPs) are hardware tools that allow you to access and monitor your network. Aggregator TAPs are used to capture 100% full duplex traffic; the traffic can then be sent to multiple monitor appliances to analyze your network. Aggregator TAPs are purpose-built hardware devices that let you see every bit, byte and packet.®

Universal functionality on this TAP supports tap 'breakout', aggregation, regeneration/SPAN and bypass modes, allowing you to fully deploy and manage your monitoring and security appliances and guarantee 100% network uptime.
  • Aggregating Universal TAPs are fully configurable and support multiple modes: Tap 'breakout,' aggregation, regeneration/SPAN and bypass.
  • Portable, Plug & Play.
  • 1U Rack Mount can hold up to four portable TAPs.
  • Supports packet injection in aggregation mode.
  • Supports link failure propagation (LFP).
  • Supports jumbo frames.
  • Passes physical errors.
  • Network Failsafe recognizes power outages and automatically closes the relay circuitry in less than eight milliseconds then reconnects the two network devices connected to ports A and B.
  • Power over Ethernet (PoE) optional
  • Easy configuration; switches on back.
  • 100% secure and invisible; no IP address, no Mac address; cannot be hacked.
  • Bypass Mode:
    • Heartbeat Packets are sent out of each monitoring port. If the heartbeat packets are not received from either direction, then Bypass Mode takes effect. Heartbeat packets are never sent out onto the live network.
  • Tested and Certified.
  • Made, tested and supported in USA.
Model No.  Network Speed  Media Modes Packet Injection Support
Network Monitor  Breakout Aggregation Regeneration
RMP-1U 1U Rack Mount Plate 1U Rack Mount Kit - Holds up to 4 Portable TAPs
P1GCCBP 100/1000M 2 Copper-RJ45 2 Copper-RJ45 Yes Yes Yes Yes Yes
P1GCSBP 100/1000M 2 Copper-RJ45 2 SFP Yes Yes Yes Yes Yes
P1GCCBPPOE+ 100/1000M 2 Copper-RJ45 2 Copper-RJ45 Yes Yes Yes Yes Yes
P1GCSBPPOE+ 100/1000M 2 Copper-RJ45 2 SFP Yes Yes Yes Yes Yes
Tap 'breakout' mode Aggregation mode Regeneration/SPAN mode Bypass mode

Portable TAPs with Remote Management Card:
P1GxxFE or P1GxxBPE Comparision Chart