AggregatorTAP: Fiber
1G/10G | Portable | Aggregation, Tap 'Breakout' and Regeneration
Visibility starts with the packet. A network TAP (test access point) is a hardware device that allows you to access and monitor your network traffic by copying packets without impacting or compromising network integrity.
The AggregatorTAP: Fiber are purpose-built network TAPs that support aggregation, TAP ‘breakout,’ and regeneration/SPAN modes guaranteeing your tools see every bit, byte, and packet.®
AggregatorTAPs are used to capture 100% full duplex traffic that can then be sent to multiple monitoring appliances or down to one monitoring port to analyze your network.










Key Features
-
Provide 100% full duplex traffic visibility
- Aggregate traffic down to one link
- Unidirectional Data Diode design
-
Media conversion; SX or LX to copper or SFP and SFP+
-
Supports aggregation, TAP ‘breakout,’ regeneration/SPAN modes
-
Supports jumbo frames
- Passive failsafe
Additional
- Portable, Plug & Play
- Easy configuration; switches on back
- 1U rack mount holds up to four (4) portable TAPs
- 100% secure and invisible; no IP address, no Mac address; cannot be hacked
- Made, tested and supported in USA
Model No. | Network Speed | Media | Modes | Data Diode |
|||
Network | Monitor | Breakout | Aggregation | Regeneration /SPAN |
|||
RMS-1U-V2 | ![]() |
1U Rack Mount Kit - Holds up to 4 Portable TAPs | |||||
P10GMSA-5 |
1G/10G |
MMF 1G-SX/10G-SR |
(2) SFP+ |
Yes | Yes | Yes | Yes |
P10GMSA-6 |
1G/10G |
MMF 1G-SX/10G-SR |
(2) SFP+ | Yes | Yes | Yes | Yes |
P10GMSA-7 |
1G/10G |
MMF 1G-SX/10G-SR |
(2) SFP+ | Yes | Yes | Yes | Yes |
P10GSSA-5 |
1G/10G |
SMF 1G-SX/10G-LR |
(2) SFP+ | Yes | Yes | Yes | Yes |
P10GSSA-6 |
1G/10G | SMF 1G-SX/10G-LR | (2) SFP+ | Yes | Yes | Yes | Yes |
P10GSSA-7 |
1G/10G | SMF 1G-SX/10G-LR | (2) SFP+ | Yes | Yes | Yes | Yes |
RMP-1U |
![]() |
1U Rack Mount Kit - Holds up to 4 Portable TAPs | |||||
P1GMCA |
1G | (2) SX Multi-mode Fiber - LC | (2) Copper - RJ45 | Yes | Yes | Yes | Yes |
P1GMSA |
1G | (2) SX Multi-mode Fiber - LC | (2) SFP | Yes | Yes | Yes | Yes |
P1GSCA |
1G | (2) LX Single-mode Fiber - LC | (2) Copper - RJ45 | Yes | Yes | Yes | Yes |
P1GSSA |
1G | (2) LX Single-mode Fiber - LC | (2) SFP | Yes | Yes | Yes | Yes |
![]() |
![]() |
![]() |
Aggregation | Tap 'Breakout' | Regeneration / SPAN |